Oil & Petrol Separators : Aluline Ltd

 

Oil and Petrol Separators
 
Use
The Hydrocarbons enter the trap with water.

Operations of the Trap
Hydrocarbons enter the trap with water. They strike the plate and this releases hydrocarbon globules which then float to the surface. Heavier silt and sludge sinks to the bottom of the trap. Most suspended solids will sink to the bottom of the trap as they absorb water and become heavier. The last compartment at the outlet allows only grey water to return to the waste water systems.

Fitting Units
The unit can be fitted into a space 75mm wider than the actual Separator.

Manufactured
Stainless Steel A1S1304 with pedestrian aluminium durbar lid. Screw fixed Stainless Steel screws.
(Heavier duty lids of galvanised mild steel on request).

Adjustments (extra cost in 100mm pedestrian increments)
Increase the T size or invert level to ensure the lid is at the finished ground level and the pipe meets the existing invert datum.
 
 
 
Separator UG4OP
Capacity
Ltrs
Inlet Outlet
775 110mm 110mm
   
UG


 
Separator UG3OP
Capacity
Ltrs
Inlet Outlet
355 110mm 110mm
   
UG




 

Oil Separators with Coalescent Filter
 
Oil Separator UG6CF
Capacity
Ltrs
Inlet Outlet
804 110mm 110mm
   
UG
 
Oil Separator UG5CF
Capacity
Ltrs
Inlet Outlet
542 110mm 110mm
   
UG
 

Standard inlet/outlet 110mm. 150mm – 200mm available on request.
 
Contact Aluline for FREE comprehensive operating instructions and advice.


To Order Tel:
087 094 0976 or 087 278 4929  

   

© Copyright 2014 Aluline LtdWebsite design by Aluline Group Ltd

Irish Water